How-To Guides

How to Refill a Lost Mary BM6000 (Step by Step)

By Vape Lounge Published 5 min read
Lost Mary BM6000 pod kit with 10ml refill container
Quick answerYou don't pour liquid into a Lost Mary BM6000. To refill it, push a new 10ml refill container into a new 2ml pod, click the pod into the battery and wait a few minutes for the coil to soak. Most problems after a refill come from a container or pod that isn't pushed fully in.

To refill a Lost Mary BM6000, you don't pour in any liquid. You replace the pod: push a new 10ml refill container into a new pod, click the pod into the battery, and give the coil a few minutes to soak before your first puff. This guide walks through how to refill a Lost Mary BM6000 step by step, how to remove the old refill, and what to check if it stops working.

Is the Lost Mary BM6000 refillable?

The BM6000 is rechargeable and the pods are replaceable, but you don't fill anything by hand. Each pack of Lost Mary BM6000 refill pods contains two parts:

  • A 2ml prefilled pod with a built-in QUAQ mesh coil, the part you vape from.
  • A 10ml refill container that slots into the pod and tops it up automatically as you vape.

Together that's 12ml of 20mg nicotine salt e-liquid per pack, rated by Lost Mary for up to 6,000 puffs. When the container runs dry, you swap in a fresh pack and keep the same battery. That design is also why the BM6000 is legal to sell in the UK: the battery is rechargeable, the pods are replaceable, and each pod holds 2ml, the legal limit for nicotine pods.

How to refill a Lost Mary BM6000 in 5 steps

  1. Take out the old pod. Pull the empty pod straight up and out of the top of the battery. The old refill container comes out with it.
  2. Unwrap the new pack. Remove the packaging and any silicone stoppers from the pod and the refill container.
  3. Push the refill container into the pod. Press the 10ml container firmly into the pod until it sits fully home. This is the step that connects the liquid to the coil, so don't skip it.
  4. Click the pod into the battery. Line it up and push it down until it sits flush.
  5. Wait before your first puff. Leave it for a few minutes (Lost Mary's kit instructions say around five) so the coil can soak up the liquid. Then start with a few gentle draws.

That's it. There are no buttons: the BM6000 fires when you draw on it.

How to remove the BM6000 refill container

If you want to check how much liquid is left, or you're swapping flavours before a pack is finished, the refill container pulls out of the pod. Hold the pod firmly and pull the container straight out without twisting. To refit it, push it back in until it sits fully home.

Avoid taking containers in and out often. Each time you do, a little liquid can escape, and the coil may need a minute to settle again.

When to change your BM6000 pod

Swap to a new pack when you notice:

  • The flavour fades or turns harsh or burnt.
  • Less vapour comes through, even with a charged battery.
  • The refill container looks empty.

Most people get several days to a week from one pack, depending on how much they vape. Don't keep using a pod once it tastes burnt; the coil has run dry and it won't recover. If you're choosing your next flavour, our guide to every Lost Mary BM6000 flavour ranks them by what UK vapers search for most.

Lost Mary BM6000 not working? 5 checks

  1. Is the refill container pushed fully into the pod? If it isn't seated, liquid can't reach the coil and you'll get a weak or burnt hit.
  2. Is the pod clicked fully into the battery? Take it out and push it back in firmly.
  3. Did you remove every stopper? A small piece of silicone left on the pod will stop it working.
  4. Is the battery charged? Charge it with any standard USB-C cable. One isn't included in the box.
  5. Are the contacts clean and dry? Wipe the top of the battery and the base of the pod with a dry tissue to remove any liquid or condensation.

If it still won't fire, try a different pod. If a second pod doesn't work either, the battery may have reached the end of its life and you'll need a new Lost Mary BM6000 kit. Take the old battery to a vape shop take-back point or a council recycling centre, never the household bin.

Can you refill a BM6000 with your own e-liquid?

It isn't designed for it. The pods have no fill port, and opening them can damage the seal or the coil. If you'd rather fill your own pod from a bottle, a refillable pod kit is the better choice, and you can still choose nic salt e-liquids in similar flavours. Our step-by-step guide on how to refill a vape pod shows how to do that without leaks.

You'll find the BM6000 and the rest of the range in our Lost Mary collection.

FAQs

Can you refill a Lost Mary BM6000 with your own liquid?

No. The BM6000 uses prefilled pods with a 10ml refill container, and there is no fill port. When the liquid runs out, fit a new BM6000 refill pod pack. To fill your own pods, use a refillable pod kit instead.

How long does one BM6000 refill last?

Lost Mary rates each pack for up to 6,000 puffs. In practice most people get several days to a week from one pack, depending on how often they vape.

Why is my Lost Mary BM6000 not working after a refill?

Usually the refill container isn't pushed fully into the pod, the pod isn't clicked into the battery, a stopper is still attached, or the battery needs charging. Check each one, wipe the contacts, and wait a few minutes for the coil to soak.

18+Vaping products are for adult smokers and vapers only. Nicotine is highly addictive. This guide is general information, not medical advice.

More guides

Elux

How to Open an Elux Liquid Bottle

To open an Elux liquid bottle, press the cap straight down and turn it anticlockwise at the same time, then lift it off. The child-resistant cap only spins...

5 min read Read →
Shopping cart

Your cart is empty.

Return to shop
close